Sync form submissions directly to your Klaviyo lists. Connect your native Framer forms to Klaviyo Connector in 30 seconds with zero client-side API key leaks.
Most Framer sites use Klaviyo for one job: growing an email list from a newsletter box, a waitlist or a lead magnet. FramerSend turns each of those submissions into a Klaviyo profile. When you set a List ID, the profile is also added to that list and an email marketing subscription is requested with consent set to SUBSCRIBED and the source labelled "FramerSend Form", so flows that start from that list can pick the person up.
There is no Zapier step in between. Framer posts the form to your FramerSend webhook URL, and FramerSend calls the Klaviyo API from its own server with your private key, so the pk_ key never appears in your published site. A returning visitor who signs up twice does not become a second profile: if Klaviyo reports the email as a duplicate, FramerSend looks up the existing profile and updates it.
What gets created: A Klaviyo profile (new, or the existing profile with the same email updated), plus list membership and an email marketing subscription request when a List ID is set.
| Framer form field | Klaviyo |
|---|---|
| email (also Email, E-mail, email_address, work_email…) | Profile emailRequired. Surrounding spaces are removed and obvious domain typos such as gmail.con or gmial.com are corrected. If no field is named like an email, the first value that looks like an address is used. |
| name or full_name | first_name and last_nameSplit at the first space. Separate firstName / first_name and lastName / last_name fields take priority when the form has them. |
| phone, mobile or tel | phone_numberSent only when it has 7 to 15 digits after spaces, dashes and brackets are removed, and does not start with 0. A + is added in front. Otherwise the phone is skipped and the profile still saves. |
| company or organization | organization |
| Any other field (message, budget, utm_source…) | Custom profile propertyStored under the Framer field name. Empty values are not sent. |
Create a private API key in Klaviyo
Go to Settings → API Keys → Create Private API Key. A custom key with write access to Profiles and Lists is enough to save profiles and list membership. Add write access to Subscriptions as well if you want the marketing consent recorded. Copy the key; it starts with pk_.
Copy the List ID
Open Audience → Lists & Segments, click the list your form should feed and copy the short ID from the page URL. The List ID field is required on the FramerSend connection form.
Connect Klaviyo in the plugin or dashboard
Open the FramerSend plugin inside Framer (Klaviyo is one of the quick picks) or Dashboard → 2. Connect CRM. Paste the key and List ID and click Test. A key that can read lists gets its List ID checked and the list name shown; a write-only key is accepted and its List ID is checked on the first real submission.
Check field names in Field Mapping
If your Framer inputs are named something unusual, submit the form once and use Dashboard → 3. Field Mapping → Auto-load fields to rename them, for example "Your e-mail" to email.
Paste the webhook URL into Framer
In Framer, select the form, open Form → Send to → Add… → Webhook, paste the FramerSend webhook URL (https://www.framersend.com/api/submit/ followed by your form ID) and publish the site.
Email is required
Cause: The submission had no email field and no value that looked like an address.
Fix: Add an email input to the form and make it required in Framer. Because this is a visitor input problem, FramerSend logs it but does not send you a failure alert email.
Invalid Klaviyo API Key. Please check and try again.
Cause: Shown by the Test button when Klaviyo answers 401 to the key.
Fix: Create a new private key (pk_…) and paste it without spaces.
Klaviyo list "…" was not found. Copy the List ID from Audience → Lists & Segments → your list.
Cause: Shown by the Test button when the key can read lists and the ID does not exist in that account.
Fix: Copy the ID from the list page URL again. Make sure the key belongs to the same Klaviyo account as the list.
Klaviyo: profile saved, but adding it to list … failed (404)
Cause: The profile was created, but the List ID is wrong or the key has no Lists write access.
Fix: Fix the List ID or key scopes, then use Retry on the failed row in Dashboard → 4. Logs. The profile update is safe to repeat.
Klaviyo: Failed to create profile — …
Cause: Klaviyo refused the profile. A key without Profiles write access is the usual reason; Klaviyo's own message follows the dash.
Fix: Edit the key scopes in Klaviyo or create a new key with Profiles write access.
Profiles reach the list but show as not subscribed
Cause: The subscription request is sent after the list step. If the key lacks Subscriptions write access it fails quietly so the lead is not lost.
Fix: Give the key Subscriptions write access. New submissions are then recorded as subscribed.
One hop instead of two. The usual tutorial is Framer webhook → Zapier Catch Hook → Klaviyo action. With FramerSend the webhook URL is the whole setup, and Klaviyo's response is visible in the same log as the submission.
No task counting. Zapier counts each action that runs as a task against your plan's monthly allowance, so a busy signup form uses tasks every day. FramerSend plans have no submission limit for any connector.
Duplicates are handled for you. In a Zap you usually add a Find Profile step before Create or Update. FramerSend already falls back to updating the existing profile when Klaviyo reports a duplicate email.
When Zapier still fits. If one signup must also post to Slack, tag a CRM record and branch on answers, a multi-step Zap does that. FramerSend sends each form to one connection.
Full comparison: FramerSend vs Zapier
Zero code or third-party plugins required
Authenticate Klaviyo Connector credentials in the FramerSend dashboard. We encrypt and store them securely.
Map your Framer form fields to Klaviyo Connector properties using our visual dropdown UI.
Paste your webhook URL into your Framer form under Send to → Webhook and publish. Submissions flow automatically.
Every plan includes Klaviyo Connector and 100+ other connectors. Pay monthly, yearly, or once. Try it free for 14 days, no card needed.
For one Framer site
For freelancers and small studios
For agencies with many client sites
14-day free trial of every connector, no card needed. Form fields and FramerSend file uploads stay free forever with a free account.
Start freeEncrypted API vault, real-time delivery, and unlimited submissions
Capture leads from your Framer site and auto-add them to targeted email campaigns.
Convert visitors into subscribers with a seamless form-to-list flow.
Automatically enroll new customers into welcome sequences.
Yes. The List ID on the connection decides the list. Every profile is added to it and an email marketing subscription is requested. Use a separate FramerSend form and connection for each list you want to feed.
It records consent as SUBSCRIBED for the email channel through Klaviyo's subscription endpoint, with custom source "FramerSend Form". Add a consent checkbox or a clear notice to your Framer form so that this matches what visitors agreed to.
No. When Klaviyo reports a duplicate, FramerSend uses the existing profile ID (or looks it up by email) and updates the attributes instead.
Every field that is not email, name, phone or company is saved as a custom profile property under the same name, so you can segment on answers such as role or budget.
Klaviyo only accepts international numbers. FramerSend sends the phone only if it has 7 to 15 digits and does not start with 0, then adds a + in front. Ask visitors to include their country code.
Sign up for a FramerSend account (or log in). Go to Connections → Add Connection → Klaviyo Connector and add your credentials. They are stored server-side and never exposed in your Framer site, which only gets a public form URL.
Yes, all API credentials are encrypted at rest. The client-side code in Framer only exposes a public Form ID, keeping your private keys entirely secure.
No. FramerSend provides unlimited form submissions across all license tiers so your live website forms never get blocked during high-traffic spikes.